Kyosho Mini Inferno Alloy Rear Lower Arm by GPM MIF056  [MIF056]

Alloy rear lower arm for Mini Inferno

This replacement rear lower arm is an alloy aftermarket part produced for Kyosho Mini Inferno platforms, supplied with E-clips, pins and Delrin collars as stated in the product name. It is intended as a direct-replacement suspension link for the Mini Inferno and Mini Inferno 09 models, retaining the same mounting points and general geometry as the original plastic arms while changing material to metal.

Use this part when you want a metal option for the rear lower arm to alter durability and steering feedback. The included Delrin collars act as low-friction spacers around the pivot pins, and the E-clips secure the pins in place. Fitment assumes the standard Mini Inferno rear arm layout; verify hole spacing on your chassis before installation.

Installation notes: remove the wheel and rear hub to access the lower arm pivot, transfer or replace the pins and collars as supplied, and secure with the provided E-clips. Check suspension travel and clearance after fitting to ensure there is no binding against the chassis or hub assembly. For tuning, changing to an alloy arm can slightly affect unsprung mass and response of the rear suspension, so retune spring or shock settings if necessary.