Kyosho Mini Inferno Front Upper Suspension Arm by 3Racing MIF-034/BU  [MIF-034/BU]

Front upper arm for Kyosho Mini Inferno

This is an RC-scale front upper suspension arm intended as a direct replacement or tuning part for Kyosho Mini Inferno ACME NB16 Racing models. The item is supplied in blue as indicated by the product name and is designed to function within the model's front suspension system rather than any full-scale application.

Use this part to restore a worn upper arm or to change suspension characteristics as part of setup work. It serves primarily to locate the front hub carrier relative to the shock and steering components, so changes here affect camber behavior and steering response.

Installation and tuning notes

• Check fit at the upper arm pivots and confirm there is no binding before final assembly.
• Retain original bushings or hinge pins unless a direct upgrade is specified by the chassis manual.
• When adjusting for handling, make small incremental changes and log each step to evaluate effects on camber and turn-in.
• Use appropriate hex driver sizes for the existing hex screws and torque to chassis recommendations; avoid over-tightening pivot hardware.