Kyosho Mini Inferno ST 64 Titanium Steering Saver Post by 3Racing MIF-045  [MIF-045]

Titanium steering saver for Mini Inferno ST 64

This is an RC-scale steering saver post designed for the Kyosho Mini Inferno ST 64 platform, supplied by 3Racing as model MIF-045. The part replaces the standard steering post with a machined titanium unit intended to resist deformation from impacts and reduce the frequency of part replacement in regular on-road use.

Functionally the post sits at the steering pivot, absorbing concentrated loads that would otherwise stress plastic or softer alloy posts. For hobbyists focused on consistent steering feel and lower maintenance between sessions, the titanium post serves as a durable wear surface while keeping installation and geometry identical to the original mounting points.

Installation notes: fit the post into the existing steering block and secure with the original hardware, confirm thread engagement and free movement of the linkage, and check for any interference before first run. Use the correct hex driver sizes for fasteners and recheck tightness after initial testing laps.

Setup and tuning role: this steering saver is a maintenance and durability item rather than a tuning part. It helps preserve steering geometry under contact and allows the driver to retain original steering characteristics with fewer replaced parts, which is useful for regular practice and short-format racing on paved surfaces.