Kyosho Mini-Z AWD 3.5mm Offset Alloy Front/Rear Ridge Rims by GPM MZA501FR+3.5  [MZA501FR+3.5]

Alloy front/rear ridge rims for Mini‑Z AWD

This GPM fitment is an RC-scale wheel set produced for Kyosho Mini-Z AWD platforms, presented as front/rear ridge-style alloy rims with a 3.5mm offset and 8.5mm nominal width per wheel. The rims are intended for Mini-Z AWD MR-03 series use and for hobbyist wheel tuning, stance adjustment, and replacement of worn or damaged plastic wheels.

Installation notes: these rims mount to standard Mini-Z AWD wheel hubs and use the same wheel hex and retention methods as stock Kyosho wheel parts. Use an appropriate hex driver for wheel installation, tighten hardware to secure the rim without over-torquing, and check tyre seating and balance after assembly. They work with typical Mini-Z scale tyres and foam inserts designed for MR-03 AWD wheel diameters.

Practical tuning role: alloy rims change wheel mass and stiffness compared with stock plastic parts, affecting rotational inertia and the feel of handling at the model scale. Use them as part of incremental setups when adjusting wheel offset, track width, or tyre choices for on-track behaviour or appearance.