KYOSHO Mini-Z AWD Alloy Front/Rear Sinkage Rims (6p, 1.5mm Offset, Width 8.5mm) by GPM MZA603F/R/+1.5  [MZA603F/R/+1.5]

Mini-Z AWD alloy sinkage rims

These alloy sinkage rims are an RC-scale replacement wheel set produced for KYOSHO Mini-Z AWD platforms, supplied by GPM under model MZA603F/R/+1.5. The rims use a six-hole mounting pattern and are manufactured in aluminum to provide a stable fit for common Mini-Z AWD wheel hubs.

Intended role: these rims serve as direct-fit hop-up parts to modify wheel offset and wheel width characteristics on Mini-Z AWD cars. The 1.5mm offset shifts wheel position laterally compared to standard parts, and the 8.5mm rim width gives a defined tyre seating surface useful when pairing narrow or low-profile tyres for track setups.

Installation notes: use the existing wheel hex and retaining hardware from your Mini-Z AWD hub assembly, verify hex size compatibility before final tightening, and torque fasteners progressively to avoid stressing the aluminum wheel. Balance and tyre seating should be checked after installation, especially if you change tyre type or add foam inserts.

Tuning considerations: altering offset and rim width affects scrub radius and track width at model scale, which can change steering response and cornering behaviour. Small incremental changes and on-track testing are recommended when evaluating handling differences.