KYOSHO Mini-Z AWD Alloy Front/Rear Sinkage Rims by GPM MZA803FR+1.5  [MZA803FR+1.5]

Mini‑Z AWD alloy sinkage rims

These are scale alloy front/rear sinkage rims for Mini‑Z AWD models supplied as 1pr and produced by GPM under model MZA803FR+1.5. The wheel uses an 18‑hole (18p) pattern, a 1.5mm offset and an 8.5mm width, intended for Mini‑Z AWD MR‑03 style fitment and scale tyre seating. This is an RC‑scale replacement or hop‑up rim set for model tuning and appearance adjustments.

The rims are machined aluminium, intended to replace plastic wheel halves to change wheel stance, tyre fitment and visual proportion without altering driveline parts. Because the offset is shallow at 1.5mm these rims move the tyre slightly outward compared with standard zero‑offset parts, which can help correct narrow tyre tuck or achieve a more accurate scale track width on certain body shells.

Installation follows standard Mini‑Z wheel procedures: remove the original wheel halves, fit tyre onto the rim, align hex and centring peg, then secure per your chassis' original screws and washers. Check clearance for suspension travel and body mounts after fitting. No modifications to motors, ESC or gearbox are required to use these rims on compatible Mini‑Z AWD platforms.