Kyosho Mini-Z AWD Alloy Steering Assembly by GPM MZA048  [MZA048]

Alloy steering assembly for Mini-Z AWD

This alloy steering assembly is an aftermarket replacement designed for Kyosho Mini-Z AWD platforms, produced by GPM and sold as 1set with the steering pin included. The part focuses on steering rigidity and predictable feedback at 1:27 scale, intended for Mini-Z tuning and on-track setup adjustments.

Construction uses aluminium to reduce flex at the steering link points compared with stock plastic assemblies, and the included pin secures the linkage pivot without altering standard servo or chassis mounting. The unit is dimensional for direct fit where Mini-Z AWD steering mounts are used, and it serves as a drop-in hop-up for hobbyists refining steering feel.

Installation notes: remove the stock steering assembly, transfer any required ball bearings or small linkages from the original unit, fit the alloy assembly to the existing mounting points, and secure the supplied pin to retain the steering arm. Use appropriate hex driver sizes for the chassis fasteners and inspect for interference with the servo horn and suspension arms during test steering sweeps.

Role in tuning: this part increases steering stiffness and can help reduce unwanted compliance in high-traffic or high-grip track conditions, allowing finer toe and Ackermann adjustments through chassis setup rather than compensating for component flex.