KYOSHO Mini-Z AWD Rear Wide Alloy Sinkage Rims 11mm (0mm Offset) by GPM MZA603RW/0  [MZA603RW/0]

Rear Wide Alloy Rims for Mini-Z AWD

This is an RC-scale rear wheel upgrade intended for Kyosho Mini-Z AWD platforms, supplied as a single pair (1pr). The rims are alloy construction described as "sinkage" style, noted in the product name as 6p with 0mm offset and an 11mm width, which affects tuck and tyre clearance on the rear axle.

Use these rims when you need to subtly change rear track or increase tyre sidewall tuck for a vintage look or tighter fitment. On MR-03 AWD variants the combination of 0mm offset and 11mm width shifts wheel position without adding additional offset hardware, so check body and suspension clearance before running.

Installation is a direct swap for compatible Mini-Z AWD wheels; remove the stock rim and mount these alloy rims, then verify axle and suspension clearance at full droop and steering. As aluminium parts, they add mass compared with plastic rims which can slightly alter rear-end rotational feel, so balance tyre choice and account for any change in handling when tuning.