Kyosho Mini-Z F1 Front Toe In/Out Linkage 3 Degree by 3Racing MKF-02/3  [MKF-02/3]

Front toe linkage for Mini-Z F1

This front toe linkage is an RC-scale steering part intended for Kyosho Mini-Z F‑1 chassis use, supplied as the 3Racing MKF-02/3 item. It provides a fixed 3 degree toe setting for the front end, giving a defined toe in or toe out geometry depending on installation orientation.

The linkage is intended to replace or supplement the stock front toe connector on Mini‑Z F‑1 models. Fitment is specific to Kyosho Mini‑Z F‑1 front steering assemblies, so confirm compatibility with your chassis before fitting. Installation generally involves removing the existing toe link and securing this unit in the same steering linkage positions; check existing fasteners and linkage ball or pin locations to match mounting points.

In tuning terms this part fixes the front toe angle to 3 degrees, which can be used as a baseline when comparing steering behavior across different setups. Use it when you want a consistent, repeatable front toe angle for track testing or display setups, and combine it with standard adjustments to shock, roll center, and front camber as required by your setup plan.