Kyosho Mini-Z MR-01 Camber Steering Block 1, 2 & 3° by 3Racing KM-018  [KM-018]

Camber steering block for Mini‑Z MR‑01

The 3Racing KM-018 is a replacement camber steering block intended for Kyosho Mini-Z MR-01 scale models. It provides selectable camber offsets at 1°, 2° and 3° to change front wheel inclination without altering other suspension components, offering a targeted way to tune handling balance on small-scale track layouts.

Compatibility is focused on the Mini-Z MR-01 platform; install the part in place of the stock steering block following your chassis disassembly procedures. The block changes the effective camber angle at the hub, so expect measurable differences in cornering grip and steering response as you step through the three settings.

Installation notes: remove the front hubs and steering knuckles as required on your MR-01, transfer any bearings or pins to the replacement block, and secure with the original fasteners. Check steering geometry after fitment and verify no binding occurs through full suspension travel and steering sweep.

Tuning role: use the KM-018 to increase or decrease camber for grip tuning on carpet or layout surfaces, and to fine-tune turn-in behavior without altering shock or spring rates. Small camber changes have pronounced effects on Mini-Z handling, so adjust incrementally and test on the track.