KYOSHO Mini-Z MR-02 Aluminum 5-Spoke Front Rim +2.5 Offset by 3Racing MR02-FP25/LB  [MR02-FP25/LB]

Front aluminum rim for Mini‑Z MR‑02

This is a 3Racing aluminum front rim made for KYOSHO Mini‑Z platforms listed in the product name. The rim uses a five‑spoke two‑tone finish in light blue and carries a +2.5 offset intended for front‑end fitment on Mini‑Z MR‑02 (MM), MR‑02 (RM) and MR‑015 series bodies. As an RC‑scale accessory the part focuses on wheel fit, appearance and predictable wheel positioning rather than altering drivetrain components.

Use and tuning role:

• Compatibility: Intended for KYOSHO Mini‑Z MR‑02 MM, MR‑02 RM and MR‑015 as stated in the product title.
• Aesthetic and setup: Two‑tone light blue finish provides a scale look while the +2.5 offset shifts the mounting face outward to change track width at the front; this affects tyre clearance and stance and can be used as part of a handling setup when combined with appropriate tyres and ride height changes.
• Material: Aluminum rim, designed as an RC wheel accessory rather than a suspension or drivetrain element.

Installation notes:

• Remove the stock plastic wheel before fitting the aluminum rim, check that the wheel hex or wheel nut interfaces match the Mini‑Z front hub on your chassis.
• Confirm tyre fit and clearance with the body shell in place, especially with the +2.5 offset which moves the wheel outward.
• Tighten fasteners evenly and avoid over‑torquing to prevent thread damage to Mini‑Z hubs or wheel nuts.
• If the listing does not specify included hardware, verify with the seller whether wheel hexes, nuts or spacers are supplied.