KYOSHO Mini-Z MR-02 Aluminum Rear Rim 5-Spoke Two-Tone +2.0 Offset by 3Racing MR02-RP20/LB  [MR02-RP20/LB]

Aluminum rear rim for Kyosho Mini-Z

This 3Racing MR02-RP20/LB is an aluminum rear rim designed for Kyosho Mini-Z platforms listed in the product title. It is an RC-scale accessory intended to replace standard plastic or alloy wheels to alter track contact geometry and visual appearance without changing drivetrain components.

The wheel uses a five-spoke two-tone finish and a +2.0mm offset to move the tyre mounting surface outward relative to the hub. In practice this affects stance and scrub radius at the rear axle on compatible Mini-Z MR-02 (MM/RM) and MR-015 models named in the product title. Because dimensions beyond the offset and spoke style are not provided in the source, verify hub fit and tyre clearance on your chassis before final installation.

Installation notes: remove the stock rear rim following your Mini-Z service procedure, check the hub bore and wheel hex seating for a secure fit, and use the original hex screw or wheel nut as applicable. After fitting, inspect wheel runout and tyre seating at low speed to confirm no rubbing on the body or suspension components.

Tuning role: a +2.0mm offset rear rim is commonly used to widen the rear track slightly, which can change lateral grip balance and rear-end behaviour. Combine wheel choice with tyre compound and shock/diff adjustments to achieve predictable handling rather than relying on a single modification.