The Belt crawler unit Catappi for MINI-Z 4x4 / 2 pieces produced by Kyosho, is classified in Spares / Hop-ups - Kyosho - Mini-Z Series - 4x4 Crawler
By changing the tires that are set up as standard regarding MINI-Z 4x4 with all the "Belt Crawler Unit Catappi", the industry of play is likely to be overwhelmingly expanded. The belt has a full-scale structure that connects high-precision molded footwear with metal pins. The gear it self does not extend greatly, avoiding the belt from coming down while driving. In addition, the procedure by which the unit itself swings improves the capacity to overcome large steps and follow different rough roadways. Comes with a soft product "grip plate" and razor-sharp "spike components". By installing these, the street area which can be driven will be further expanded. Since the sprocket diameter is 24 mm set alongside the standard tire diameter of 37/42 mm, it becomes a lowered geared and that can be tenaciously cleared even on stones with extremely high slopes. After assembling the belt crawler product, it may be changed as though changing tires. Two sets must replace the four wheels.
● After construction, it could be set up with a single screw (construction KIT)
● Compatible with road area kinds that can not be driven with tires
● versatile control associated with rotation for the product itself
● Design that makes it hard for the gear in the future off
● Improved approach angle, departure angle, road clearance, trackability, and hold
● 2 pieces <2 sets are required for 1 car (4 wheels)>
● appropriate for all MINI-Z 4x4 models
* Jimny has to cut the human body of some interference parts.
* Cannot be used in combination with the MXW005 metal front hub set.
* may be used with all the MXW008 die-cast front side hub axle situation.
