KYOSHO V One RRR/V One SIII/V One RRR Evo 64 Titanium Suspension Pin (Front Lower) by 3Racing V3R-035B  [V3R-035B]

Front lower titanium suspension pin for Kyosho V One

This front lower suspension pin is a scale RC replacement part intended for the KYOSHO V One RRR, V One SIII, and V One RRR Evo 64 chassis, supplied by 3Racing as model V3R-035B. Made from titanium, the pin functions as the lower pivot point in the front suspension assembly and is intended to offer a durable, corrosion-resistant option compared with standard steel pins.

In practice this part is used where the lower suspension arm connects to the upright or hub carrier. During routine maintenance or setup changes it replaces worn pins to restore proper pivot alignment and reduce play that can affect steering feel. Because it is an RC-scale component, installation follows model-level procedures and does not require vehicle-grade tools.

Installation notes: remove the front uprights and lower arms per your chassis routine, press out the existing lower pin, fit the titanium pin ensuring correct orientation, and secure retaining hardware as original. After installation confirm suspension travel and wheel alignment on the bench before track use. A light lubricant on mating surfaces may aid assembly but avoid heavy greases that attract debris.

Tuning role: replacing the front lower pin can reduce unwanted movement at the pivot under load, providing more consistent steering feedback during cornering and braking for 1:10 touring car setups. Use the pin as part of a broader suspension check that includes bushings, bearings, and arm geometry.