LOSI LMT 2.0 Grave Digger 4X4 Solid Axle 6061-T6 Alloy Front/Rear Internal Spring Shock Set by GPM LMT2130134  [LMT2130134]

Front/Rear Internal Spring Shock Set for LOSI LMT 2.0

This RC-scale shock kit is designed for the LOSI 1/8 LMT 2.0 Grave Digger 4X4 Solid Axle brushless monster truck and replaces the factory shock parts LOS-1830 and LOS-1831. The set combines two 130mm center-distance shocks and two 134mm center-distance shocks to allow flexible front and rear fitment on the LMT 2.0 platform.

Key construction changes supplied in the kit include 6061-T6 aluminum shock tubes and shock caps for improved sealing, a larger 4.0mm shock shaft for increased rigidity over the original 3.5mm shaft, and factory-filled 100 cSt silicone oil for a more consistent rebound feel. The kit also uses Delrin collars on the shock tops and ball end heads with an 8.0mm length for mounting compatibility.

One 130mm shock pair is supplied without an installed internal spring to allow setup flexibility; GPM provides black internal springs and spring retainers for self-installation if needed. The included spring wire diameter is 0.8mm versus the original 0.7mm for higher spring strength, and users may revert to the original springs if a softer rate is preferred.

Use this kit when replacing worn factory shocks or when tuning ride height and rebound on the LOSI LMT 2.0. The parts provide a stiffer shaft and upgraded sealing for more repeatable performance on rough tracks while keeping installation straightforward for hobby-level maintenance.