LOSI LMT 4WD Solid Axle 7075 Alloy Steering Servo Mount Plate by GPM LMT024L  [LMT024L]

Servo mount for LOSI LMT

This GPM steering servo mount plate is an aftermarket 1/5 standard 7075 alloy component produced for LOSI LMT solid axle platforms, intended to replace the stock servo mounting arrangement and provide a stiffer attachment point in the servo area. The design centers on improving mechanical support where larger or higher-torque servos are used, reducing flex under load while keeping fitment compatible with LOSI LMT-related chassis configurations.

Installation uses the supplied cap and flat head screws plus thin stainless shims to establish a precise stack height and alignment. The plate locates on the factory servo area and retains the servo footprint while offering more rigid anchor points; installers should confirm servo spline alignment and horn clearance before final tightening. The included shims allow minor positional adjustments without modifying the chassis.

Tuning considerations: when fitting a larger servo consider servo mount height, horn throw and link geometry to avoid binding at full lock, and check steering centring after mounting. The alloy plate affects chassis stiffness locally, so re-check steering endpoint and dual-rate settings in your transmitter after installation to restore desired steering response.

Use this plate when a more rigid servo mounting solution is required for LOSI LMT solid axle models, and verify servo clearance and steering geometry during installation to maintain predictable handling.