LOSI LMT 4WD Solid Axle Monster Truck +10mm Aluminum Hex Adapters by GPM LMT010W/+10  [LMT010W/+10]

Aluminum +10mm hex adapters for LOSI LMT

This aftermarket hex adapter set is made for the TEAM LOSI LMT 4WD solid axle monster truck platform and provides a bolt-on method to widen wheel track by 10mm per side. Machined from 6061 T6 aluminum, the adapters replace the original shorter hexes to shift wheel position outward while keeping the wheel hub interface unchanged.

The kit's role in setup and tuning is straightforward: increasing track width for greater lateral stability and a wider stance, useful when adjusting handling on loose or uneven surfaces. Because these are RC-scale components intended for wheel hub hex location, they are suitable for hobby use only.

Installation uses the wheel hub hex position and the supplied stainless steel cap head screws to fasten the adapters to the hub and wheel. The parts are intended to directly replace the stock hex thickness, increasing the effective hex length from the original 10.5mm to 20.5mm to achieve the +10mm offset per side.

Use these adapters when you need a wider stance without changing hubs or wheel offsets, and verify thread engagement of the supplied screws during installation to maintain secure wheel mounting.