LOSI LMT 4WD SOLID AXLE MONSTER TRUCK Front+Rear Universal CVD Drive Shaft 10pc set by GPM LMT037SA  [LMT037SA]

Front and rear universal CVD drive shafts

This upgrade kit supplies front and rear universal CVD drive shafts designed for LOSI LMT scale 1/8 solid axle monster trucks. The assembly uses a mixed steel and 6061 T6 aluminium construction and CVD swing joint geometry to transmit drive from the motor through the drivetrain while keeping weight controlled. Rubber dust boots are included to protect the moving joints from grit and debris encountered on off‑road runs.

Key dimensional details from the component set are intended for driveline replacement or tuning: collapsed length about 115 mm and extended length about 120 mm, with an installation distance range of 115–120 mm for proper fit in the front and rear drive areas. The parts locate at the front and rear drive shaft area and are made for RC‑scale use only.

The kit suits builders who need stronger CVD links without substantially increasing unsprung mass, and it supports routine serviceability thanks to replaceable pins and dust boots.

Use this set to replace worn CVD shafts or to reinforce drivetrain sections on LOSI LMT models where the specified installation distance and collapsed/extended lengths match the chassis layout.