LOSI LMT 4WD Solid Axle Monster Truck Roller Carbon Fiber Front/Rear Chassis Side Panels by GPM LMT014F/R  [LMT014F/R]

TEAM LOSI LMT 4WD SOLID AXLE MONSTER TRUCK ROLLER Carbon Fiber Front/Rear Chassis Side Panels - 18pc set - GPM LMT014F/R
Price:
USD$48.90
Brand:
GPM
Model:
LMT014F/R
GTIN:
4894538352283
Condition:
Brand New
Write a review
alt="TEAM LOSI LMT 4WD SOLID AXLE MONSTER TRUCK ROLLER Carbon Fiber Front/Rear Chassis Side Panels - 18pc set - GPM LMT014F/R" title="TEAM LOSI LMT 4WD SOLID AXLE MONSTER TRUCK ROLLER Carbon Fiber Front/Rear Chassis Side Panels - 18pc set - GPM LMT014F/R"
alt="TEAM LOSI LMT 4WD SOLID AXLE MONSTER TRUCK ROLLER Carbon Fiber Front/Rear Chassis Side Panels - 18pc set - GPM LMT014F/R" title="TEAM LOSI LMT 4WD SOLID AXLE MONSTER TRUCK ROLLER Carbon Fiber Front/Rear Chassis Side Panels - 18pc set - GPM LMT014F/R"
alt="TEAM LOSI LMT 4WD SOLID AXLE MONSTER TRUCK ROLLER Carbon Fiber Front/Rear Chassis Side Panels - 18pc set - GPM LMT014F/R" title="TEAM LOSI LMT 4WD SOLID AXLE MONSTER TRUCK ROLLER Carbon Fiber Front/Rear Chassis Side Panels - 18pc set - GPM LMT014F/R"
alt="TEAM LOSI LMT 4WD SOLID AXLE MONSTER TRUCK ROLLER Carbon Fiber Front/Rear Chassis Side Panels - 18pc set - GPM LMT014F/R" title="TEAM LOSI LMT 4WD SOLID AXLE MONSTER TRUCK ROLLER Carbon Fiber Front/Rear Chassis Side Panels - 18pc set - GPM LMT014F/R"

Chassis side panel upgrade for LOSI LMT

This GPM kit supplies carbon fiber front and rear chassis side panels designed for the TEAM LOSI LMT 4WD SOLID AXLE MONSTER TRUCK ROLLER platform. The panels replace the original side pieces to restore or upgrade an LMT roller chassis with lighter, stiffer carbon fiber while using the supplied stainless steel fasteners for a direct swap.

The set is intended as a scale RC accessory to protect the chassis rails from impacts and wear, and to maintain alignment of mounting points during setup and tuning. Installation uses the included hardware and fits on both sides of the chassis without requiring additional machining or modification when fitted to the LMT roller specified.

Packing includes

  • Carbon fiber chassis side panels - 2pcs
  • Stainless Steel Round Head Screw 3x10 - 10pcs
  • 3MM lock nut - 6pcs

Original Name / Part No:

LOS241034

Specifications

  • Item: Carbon fiber front/rear chassis side panels set
  • Material: Carbon fiber panels with stainless steel hardware
  • Model Number: LMT014F/R
  • Compatibility: TEAM LOSI LMT 4WD SOLID AXLE MONSTER TRUCK ROLLER

For hobbyists maintaining or restoring an LMT roller, this GPM side panel kit offers a like-for-like replacement that simplifies chassis upkeep and supports consistent setup during suspension and drivetrain tuning.

This item is compatible with

  • LOSI-1/8 LMT 4WD SOLID AXLE - LOS04022

Will these panels fit a stock LOSI LMT roller without modification?

The kit is made to replace the original side panels on the TEAM LOSI LMT 4WD SOLID AXLE MONSTER TRUCK ROLLER and uses the supplied hardware for direct installation on a stock roller.

What tools are recommended for installation?

A hex driver sized for the included 3x10 round head screws and a small wrench for the 3mm lock nuts are sufficient for assembly; avoid over-tightening to prevent damage to carbon fiber.

How many pieces are in the kit and what are they?

The kit contains 18pcs total: 2 carbon fiber chassis side panels, 10 stainless steel 3x10 round head screws, and 6 3mm lock nuts as listed in the packing section.

Can these panels affect chassis tuning or setup?

The panels are a replacement component and primarily serve protection and structural consistency; any weight or stiffness differences compared to stock parts can slightly influence balance, so verify setup after fitting.

Copyright © 2008-2026 rcjaz.com All rights reserved