Mr.Hobby GSI-S79 Mr. Color Spray Shine Red — Spray Paint for RC-Scale Bodies  [GSI-S79]

Spray paint for RC bodies

Mr.Hobby GSI-S79 is a spray-format paint intended for RC-scale model finishing, labeled as Mr. Color Spray Shine Red. The description focuses on practical surface finishing for scale bodies and plastic components used in model cars and similar RC assemblies.

Use this spray to provide a continuous gloss layer on model car shells or other painted parts. Prepare surfaces by cleaning off dust, oils, and release agents, then mask areas not to be painted. Spray in thin, even passes to avoid runs and to build color progressively.

Application tips: hold the can at a consistent distance, apply multiple light coats rather than a single heavy coat, and allow adequate flash-off between passes to reduce orange peel. For masked edges use a gentle overlap and avoid heavy deposit near seams. Test-spray on a scrap piece before painting final parts to confirm adhesion and finish.

Drying and handling: finish characteristics depend on ambient conditions and coat thickness; handle painted parts with care until fully cured. This product is described here as an RC-scale accessory and is intended only for model and hobby use.