PRO BOAT Miss Illinois U-34 battery tray Carbon Fiber+7075 Alloy by GPM PUH0126  [PUH0126]

PROBOAT Miss Illinois U-34 Carbon Fiber+7075 Alloy Battery Tray set - GPM PUH0126
Price:
USD$38.90
Brand:
GPM
Model:
PUH0126
GTIN:
4894538417265
Condition:
Brand New
Write a review
alt="PROBOAT Miss Illinois U-34 Carbon Fiber+7075 Alloy Battery Tray set - GPM PUH0126" title="PROBOAT Miss Illinois U-34 Carbon Fiber+7075 Alloy Battery Tray set - GPM PUH0126"
alt="PROBOAT Miss Illinois U-34 Carbon Fiber+7075 Alloy Battery Tray set - GPM PUH0126" title="PROBOAT Miss Illinois U-34 Carbon Fiber+7075 Alloy Battery Tray set - GPM PUH0126"
alt="PROBOAT Miss Illinois U-34 Carbon Fiber+7075 Alloy Battery Tray set - GPM PUH0126" title="PROBOAT Miss Illinois U-34 Carbon Fiber+7075 Alloy Battery Tray set - GPM PUH0126"
alt="PROBOAT Miss Illinois U-34 Carbon Fiber+7075 Alloy Battery Tray set - GPM PUH0126" title="PROBOAT Miss Illinois U-34 Carbon Fiber+7075 Alloy Battery Tray set - GPM PUH0126"
alt="PROBOAT Miss Illinois U-34 Carbon Fiber+7075 Alloy Battery Tray set - GPM PUH0126" title="PROBOAT Miss Illinois U-34 Carbon Fiber+7075 Alloy Battery Tray set - GPM PUH0126"

Battery tray for PRO BOAT U-34

This aftermarket battery tray set is a replacement and upgrade part designed for the PRO BOAT Miss Illinois U-34 scale hydro hull, serving as the primary mounting platform for the main propulsion battery. Construction combines a 2.5mm carbon fiber plate with aerospace-grade 7075-T6 alloy components to keep mass low while retaining structural support for larger battery packs.

The tray extends the stock battery location to accommodate larger cells, accepting packs up to 8000mAh with a maximum envelope of 180mm (L) x 50mm (W) x 42mm (H). Use the included stainless fasteners and Velcro straps to secure the pack and retain easy service access. The design focuses on consistent placement and repeatable balance changes when adjusting battery position for trim and handling.

Installation requires basic disassembly of the hull interior to access the existing tray mounting points, replacement with the supplied hardware, and final alignment checks to ensure no contact with the motor, gearbox, or hull structure. The tray supports standard Velcro mounting and countersunk screw fixation as supplied.

Packing includes

  • Battery Tray Set - 1pcs
  • Stainless Steel Flat Head Screws 3x6 - 8pcs
  • Stainless Steel Cap Head Screws 3x10 - 8pcs
  • Velcro Straps 2x48cm - 2pcs

Original Name / Part No:

PRB286104?PRB-4067

Compatible Models

  • PRO BOAT U-34 34" Unlimited Hydro Race Boat RTR-PRB-2072T1

Choose this tray when you need a stiffer mounting platform and added battery capacity for extended run sessions on PRO BOAT U-34 hulls, while keeping predictable weight distribution for trim and handling adjustments.

The tray is designed for the Miss Illinois U-34 hull and uses the internal mounting area; verify alignment during install and use the supplied screws to match the hull mounting points.
The tray accepts batteries up to 8000mAh with maximum dimensions of 180mm long, 50mm wide, and 42mm high as stated in the product details.
The tray uses a 2.5mm carbon fiber plate combined with 7075-T6 aluminium alloy components to balance light weight and rigidity.
Yes, the set includes the tray, stainless flat and cap head screws, and two Velcro straps as listed in the packing section.
Installation requires common hand tools such as hex drivers and a screwdriver to secure the supplied fasteners and align the tray in the hull.

Copyright © 2008-2026 rcjaz.com All rights reserved