Sanwa 1/10 Car 3-Channel Transmitter Combo by JAZRIDER SW-MX6-Combo  [SW-MX6-Combo]

3-channel transmitter kit for 1/10 cars

This combo groups a Sanwa-branded MX-6 style 3-channel 2.4GHz transmitter system with the core peripherals needed to get a 1/10 scale electric car operational. The set is packaged for hobbyists who want a ready transmitter, receiver, steering servo, battery and charger without sourcing components separately.

Functionally the transmitter and RX-391W receiver handle standard steering and throttle channels with a third channel available for auxiliary functions such as lights or a winch depending on your car setup. The included analog high-torque servo covers typical steering loads for 1/10 on-road or light off-road models, while the 5000mAh Ni‑MH battery provides run power for the model or can be used to power servos and electronics during testing and setup.

Compatibility and tuning roles are straightforward: use the transmitter trims and channel end-point settings to centre steering and set throttle travel, mount the RX-391W in a clean radio box away from motor wires, and secure the servo with the manufacturer-recommended screws and linkages. For battery charging, use the supplied charger and observe standard Ni‑MH charging precautions.

The bundle provides a practical starter radio package for 1/10 scale electric cars where a reliable 3-channel transmitter, receiver, steering servo and power system are required; it fits common hobby use and basic tuning workflows.