This Factory Pro aftermarket rear steering hub plate is produced for the Schumacher FT9 1/10 on-road chassis and supplied as a single pair (1pair). Machined graphite is used to reduce unsprung mass and retain steering rigidity, making it a focused option for shops and hobbyists who adjust steering geometry for different track conditions.
The part mounts to the FT9 rear steering assembly and replaces the standard hub plate without altering the core linkage layout. Installation typically requires removal of the rear uprights and basic trim around the hub area, careful alignment of ball studs and bearings, and confirmation of parallel steering links. This description refers strictly to RC-scale components and does not imply any real vehicle use.
As a tuning component, the graphite plate influences steering feel and response by offering a stiffer mounting surface compared with some stock composites. Use it when testing toe, ackermann, or roll-center changes to assess handling differences; it is compatible only with Schumacher FT9 specified mounting points and hardware.
Copyright © 2008-2026 rcjaz.com All rights reserved
