Schumacher Mi10/Mi9/Mi8 HGT Front split upper deck graphite 1.6 by Factory Pro O-SCP043S  [FP-O-SCP043S]

Price:
USD$12.30
Brand:
Factory Pro
Model:
FP-O-SCP043S
Condition:
Brand New
Write a review

Front split upper deck for Schumacher Mi10 series

This is an RC-scale front split upper deck intended as a direct aftermarket replacement or upgrade for Schumacher Mi10 family cars. It is produced in graphite 1.6 as stated, and its role is to change front-end stiffness and contribute to chassis setup adjustments rather than to alter any electrical or drive components.

Fitment and use: the part is designed to sit on the front shock tower area and integrate with existing mounting points on the specified Schumacher Mi10/Mi9/Mi8 HGT chassis variants. Installation typically follows the existing screw locations and uses the stock hardware unless the chassis manual specifies otherwise.

Tuning notes: using a graphite 1.6 deck will influence front chassis rigidity and steering feedback. Expect incremental changes in turn-in and mid-corner balance, so make suspension and sway bar adjustments as needed during setup sessions to tune handling to track conditions.

Compatibility

  • Schumacher Mi10
  • Schumacher Mi9
  • Schumacher Mi8 HGT

Is this a direct bolt-on replacement for the original upper deck?

It is intended to match the stock mounting points for the listed Schumacher chassis, so it functions as a direct replacement in most standard setups.

How does graphite 1.6 affect handling compared with the stock part?

Graphite 1.6 increases front-end stiffness relative to softer materials, which can sharpen turn-in and change mid-corner balance, requiring fine tuning of suspension settings.

Any special tools or parts required for installation?

Installation normally uses existing screws and hardware; standard hex drivers for your chassis hardware are sufficient.

Copyright © 2008-2026 rcjaz.com All rights reserved