Serpent 110473 Shim 3.5x10x0.5 for SRX8GTR EC GP (SER600077)  [SER110473]

3.5x10x0.5 Shim for SRX8GTR

This Serpent 110473 shim is an RC-scale spacer with nominal dimensions 3.5x10x0.5 meant to adjust small clearances on compatible models such as the SRX8GTR EC GP (SER600077). As a thin metal shim it is intended for incremental tuning tasks where fractions of a millimetre change can affect gear engagement, bearing play, or component alignment.

Use the shim to fine-tune mesh and alignment rather than as a load-bearing repair. Typical applications include correcting pinion-to-spur clearance, taking up endplay at shafts or bearings, and providing minimal spacing under small plates or linkages. Because thickness is fixed at 0.5 mm, multiple shims can be stacked only when deliberate incremental change is required and space permits.

Installation notes: ensure mating surfaces are clean and flat before insertion, place the shim fully seated under the targeted component, confirm free rotation and correct engagement after fitting, and re-check any fastener torque or retaining features following reassembly. Avoid bending the shim during handling to preserve consistent thickness and flatness.