Tamiya 22099 LT Torque-Tuned 35T Motor for 1/10 RC Cars  [22099]

Compact brushed motor tuned for low-end torque in 1/10 RC cars

The LT Torque-Tuned 35T is a brushed motor designed for 1/10 scale electric RC cars where stronger low-speed response and controlled acceleration are desired. The 35T tooth count (35 turns) indicates a wind count tuned toward torque rather than high top speed, making it a common choice for tight-track touring setups, modified off-road rigs that need better pull, or for drivers wanting smoother throttle control during technical runs.

Installation notes: confirm pinion gear tooth count and mesh match your chassis spur gear and motor mount. This motor fits standard 1/10 car motor mounts that accept long-can brushed motors; check shaft alignment and secure mounting to avoid gear lash. Use an ESC rated for brushed motors and set timing/drag brake per the chassis requirements. During initial runs monitor motor temperature and inspect the commutator and brushes after a short break-in period.

Maintenance tips: keep the commutator clean and check brush wear periodically. Remove debris from cooling vents and ensure the motor can ventilate inside the body or through an access port. For tuning, pairing this 35T motor with a lower-pitched pinion or higher-count spur can alter acceleration and top speed—adjust pinion/spur combinations based on track layout and battery choice.