The XBG NITRO BLASTER produced by Tamiya in 1/10 scale Engine Car series AWD drivetrain RTR (Ready-to-Run), is classified in R/C Models - Off-Road - Buggy - Nitro Powered
Tall Speed Motor R/C Made Easy! The high pitched screaming motor, the sweet smell of gas and exhaust fumes, the awesome rate from the start line, nothing quite comes even close to the buzz of motor R/C. Whether you're currently hooked and seeking for a top performance straight forward new ride, or perhaps you are not used to engine R/C, the Nitro Blaster is sure to satisfy. Set contains factory built framework fully equipped with a robust 2.5cc engine, fully finished body with stickers pre-applied, and trigger kind transmitter. Capable of lightning rates on both dust and on-road tracks, Nitro Blaster will keep your competitors behind irrespective of the landscapes. New Tech, Awesome Performance! Nitro Blaster is running on Tamiya's NDF-01 framework, featuring aluminum die-cast motor mount built-into very durable resin lower deck for optimum temperature dissipation and low center of gravity, and engine and gas tank loaded to the center of chassis for ideal fat distribution. The huge power through the 2.5cc engine is transformed into real operating performance via center bulkhead, fully sealed and bearing loaded differential gear box, and universal bones. Because of the NDF-01, you not just get a powerful glow engine, but a very efficient and very reliable rushing machine.
High End FR-15S Motor Effective recoil begin FR-15S motor features 2.5cc displacement with big diameter slide-valve carburetor and back exhaust layout. Engine features adjustable main needle and idle needle to obtain optimum engine performance. Powerful disk brake system offers the safe and controlled stopping necessary for a high-powered engine.
Frontal Impact Control System (FICS) 4-wheel independent double wishbone suspension system features additional long suspension arms expanding from center of chassis. Front Side suspension system hands are protected by front Impact Control System (FICS), which absorbs effect during a front-on collision by an expandable suspension mount. Camber angle and toe can be adjustable for both front and back tires.
Large-sized Ball Bearings Extra large ball bearings, including 2112 bearings, are employed throughout the drive train for long lasting, efficient performance. Extremely smooth chassis bottom for most useful skid performance is acquired via sinking all screw heads and eliminating any height distinction between lower deck and aluminum die-cast engine mount.
Trigger Type Transmitter for Precise Control Transmitter was specifically designed by renowned German industrial designer, H. A. Muth, designer associated with the Suzuki GSX1000S Katana motorcycle. The unique, ergonomic design, features controls and trigger positioned for optimum performance with reduced interruptions. All components that require a soft touch for accuracy maneuvering such as for instance tyre, trigger and grip have already been produced from top quality soft resin. Control switches and trims are located on front side for a person friendly design.
Fundamental Requirements
- Overall size: 440mm, width: 265mm, height: 175mm
- General weight: 2590g (*Weight contains batteries packed, gas unloaded)
- Chassis product: dietary fiber cup based nylon
- Suspension: Separate double wishbone front and back suspension
- Drive train: Shaft driven 4WD
- Tire width/diameter: 40/90mm (front and back)
Things required (sold separately) Glow plug heater, fuel filler, glow-engine fuel and R6/AA/UM3 batteries for transmitter & receiver
Wide Range of Tune-Up Alternatives ITEM No. PRODUCT NAME
- 53778 NDF-01 Off-Road Spring Set
- 53780 NDF-01 2-Speed Transmission
- 53781 2112 Sealed Ball Bearing Set (2 pcs.)
- 53799 NDF-01 internal Sponge (4 pcs.)
- 53801 NDF-01 Twin Brake Set
- 53802 NDF-01 Reinforced Drive Flange Shaft
- 53803 NDF-01 On-Road Stabilizer Set
- 53812 NDF-01 2-Speed Transmission Steel Joint Ball
- 53813 NDF-01 2-Speed Transmission Reinforced Clutch Bell
- 53814 NDF-01 2-Speed Transmission Driven Gear (54T/57T)
- 53815 NDF-01 2-Speed Transmission Drive Gear 12T (1st Gear)
- 53816 NDF-01 2-Speed Transmission Drive Gear 13T (first Gear)
- 53817 NDF-01 2-Speed Transmission Drive Gear 14T (2nd Gear)
- 53818 NDF-01 2-Speed Transmission Drive Gear 15T (second Gear)
- 53819 NDF-01 Reinforced Metal Drive Gear 12T
- 53820 NDF-01 Reinforced Metal Drive Gear 13T
- 53821 12mm Aluminum Wheel Nut (4 pcs.)
RTR NITRO XB KITS NEED: (unless claimed in a different way above)
- Battery: 4AA for Receiver 8AA for Transmitter
- Fuel: Nitro Glow Fuel
- Beginning Equipment: Glow igniter
- Misc. Items: Building and track equipment
