Tamiya 58284 - 1/10 TB Evolution II / Limited Edition  [58284]

Tamiya 58284 - 1/10 TB Evolution II / Limited Edition
Price:
USD$339.89
Brand:
Tamiya
Model:
58284
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
R/C Models - On-Road - Touring Cars - Electric Powered category
Write a review
alt="Tamiya 58284 - 1/10 TB Evolution II / Limited Edition" title="Tamiya 58284 - 1/10 TB Evolution II / Limited Edition"
alt="Tamiya 58284 - 1/10 TB Evolution II / Limited Edition" title="Tamiya 58284 - 1/10 TB Evolution II / Limited Edition"
alt="Tamiya 58284 - 1/10 TB Evolution II / Limited Edition" title="Tamiya 58284 - 1/10 TB Evolution II / Limited Edition"
alt="Tamiya 58284 - 1/10 TB Evolution II / Limited Edition" title="Tamiya 58284 - 1/10 TB Evolution II / Limited Edition"
alt="Tamiya 58284 - 1/10 TB Evolution II / Limited Edition" title="Tamiya 58284 - 1/10 TB Evolution II / Limited Edition"
The TB Evolution II / Limited Edition produced by Tamiya in 1/10 scale TRF series AWD drivetrain assembly kit, is classified in R/C Models - On-Road - Touring Cars - Electric Powered

The TB Evolution evolves just as before! The pure race form of the TB Evolution chassis, along with its longitudinally set up motor and shaft 4WD has reached another phase of chassis development. This next amount of development means a level faster top rate, a transformation in suspension system geometry for improved control, and a far more balanced left/right roll. Forward and back gear instances have been securely fastened with aluminum bulkheads. Chassis employs aluminum suspension system mount allowing adjustment of skid angle on suspension arms.

TB Evolution II includes not merely a full array of newly designed standard parts, but an arsenal of cutting-edge battle option parts besides!

  • 2.5mm-thick carbon reduced framework
  • 2.0mm-thick carbon top frame
  • 2.5mm-thick forward/rear carbon damper stay
  • 2.5mm-thick carbon body mount stay
  • 2.0mm-thick carbon battery plate
  • TRF dampers
  • Aluminum suspension mount
  • Aluminum motor mount
  • Aluminum propellar shaft
  • Full bearing set
  • Aluminum engine heat sink
  • Aluminum servo stay (short)
  • Light-weight aluminum wheel hub
  • Front/rear universal shaft
  • Unique ball diff.
  • Front one-way
  • Front/rear stabilizer
  • Specialized urethane bumper
  • Fiber mold tire, medium-narrow type A
Specs
  • General length: 378mm
  • General width: 187mm
  • Minimal approval: 5mm
  • Body weight fully equipped: 1,490g (including TP-S3003 servo, CPR Unit, engine, RC3000MH battery)
  • Wheel base: 257mm
  • Tread (front and rear): 163mm
  • Chassis material: carbon
  • Chassis kind: dual deck frame
  • Steering tie rods: split in three portions
  • Suspension (front and rear): double wishbone
  • Caster angle (f/r): 8deg/0deg
  • Camber angle (f/r): adjustable
  • Toe angle (f/r): 0deg (variable)/3deg
  • Skid angle: 1.6deg/0deg
  • Dampers (f/r): TRF dampers
  • Drive train: shaft driven, full-time 4WD
  • Gear ratio: 6.73:1(kit standard)
  • Diff gear system (f/r): ball diff.
  • Speed controller: electronic speed controller
  • Tire width (f/r): 24mm
  • Tire diameter (f/r): 64mm
  • Tread pattern (f/r): race slick

*Limited Editionn
Motor, human anatomy, R/C equippment, and battery pack sold separately

ELECTRICAL KITS NEED:: (unless claimed in a different way above)
  • Radio: 2-Channel with servo(s)
  • Battery: 6-cell flat with standard Tamiya connector
  • Charger: AC/DC timed or peak for 6-cell battery pack
  • Paint: PS for Polycarbonate/TS for ABS
  • Misc. Products: Building and track gear

Copyright © 2008-2024 rcjaz.com All rights reserved