Tamiya CC01 Servo Saver 25T Aluminium with Steel Tie Rod by GPM CC025STM  [CC025STM]

Servo saver upgrade for CC01

This aluminium hi-torque servo saver is an aftermarket replacement designed for the Tamiya CC01 chassis, supplied as a 1 set unit. It pairs an aluminium saver body with a steel tie rod, and the 25T spline matches common servo horns used on many scale radio-controlled models. The assembly's role is to reduce shock loads transmitted to the servo while keeping direct steering response suitable for tuning and scale driving.

The component is intended for model-scale use only and replaces the stock plastic saver to provide a firmer interface between the servo output and steering linkage. When tuning steering feel, this part helps balance protection and feedback: the aluminium body adds stiffness, while the steel tie rod preserves straightness under load.

Installation notes: remove the original servo saver and confirm the spline count matches your servo horn before fitting, secure linkages to the recommended thread engagement, and verify steering centring after installation. No electronic adjustments are required, though small trim changes may be needed to re-centre the servo.