TAMIYA CC-02 Chassis Aluminum Front Lower Suspension Link Arms by JAZRIDER JR-CC209-BK  [JR-CC209-BK]

Front lower suspension link arms for CC-02

This is an RC-scale front lower suspension link arm set intended for the TAMIYA CC-02 chassis, produced by JAZRIDER under model JR-CC209-BK. The components are machined from aluminum to provide a consistent, rigid mounting point compared with common molded plastic links, and are intended as direct-replacement hop-ups where the stock parts fit the same mounting points on a CC-02 layout.

Installation is straightforward for experienced hobbyists: remove the stock front lower links, verify alignment with existing knuckles and crossmembers, then refit using the chassis' original mounting hardware. Confirm clearances for suspension travel and steering throw before final tightening. The aluminum construction reduces flex at the link mounting, while keeping the part suited to scale RC usage; this article does not describe or change any original chassis geometry requirements.

In tuning terms these front lower link arms act on the lower arm pivot points of the front suspension and therefore influence roll transfer and steering feedback in an RC context. Swapping to metal links is commonly used to reduce wear and maintain consistent geometry under prolonged use, especially in scale off-road applications on CC-02 style rigs.