TAMIYA CC-02 Chassis Aluminum Front/Rear Shock Tower by JAZRIDER JR-CC203-BK  [JR-CC203-BK]

Tamiya CC-02 Front/Rear Shock Tower Overview

This JAZRIDER JR-CC203-BK is an aluminum front and rear shock tower designed for the Tamiya CC-02 chassis. It serves as a direct replacement or hop-up part that relocates the shock mounting points to a rigid aluminum plate instead of the stock plastic tower, giving a firmer mounting platform for the shock assemblies and helpful feedback when dialing suspension settings.

Installation is straightforward on a CC-02 platform using the existing screw points and standard hardware. When replacing the stock tower, check alignment of the shock shafts and confirm clearances with the suspension arms and body mounts before final tightening. Replace hardware with supplied or equivalent hex screws if needed to match the new tower's countersinks.

In setup terms, this part is primarily for builders wanting a firmer shock anchor for more repeatable tuning. The aluminum tower reduces flex at the mounting points compared with plastic, which can make small changes in spring or damping more noticeable during tuning sessions. It is commonly used alongside upgraded shocks to refine compression and rebound behavior on trail and crawling runs.