Tamiya CC-02 chassis aluminum rear lower suspension link arms by JAZRIDER JR-CC210-RD  [JR-CC210-RD]

Rear lower link arms for CC-02

This RC-scale rear lower suspension link arm set is intended for Tamiya CC-02 chassis applications and is offered by JAZRIDER under model JR-CC210-RD. The text focuses on fitment considerations, installation tendencies, and the role these link arms play in suspension geometry and handling for scale trail and crawler models.

The parts are aluminum, intended to replace stock plastic links to reduce flex and maintain alignment under load. As a hop-up component they affect rear axle positioning, roll center and anti-squat characteristics when used in conjunction with existing suspension mounts and turnbuckles on the CC-02 platform. Describe your current setup before changing multiple linkage points at once to isolate effects.

Installation notes: these link arms attach to the existing CC-02 rear suspension mounting points, so standard hardware and retaining methods on the chassis are used. Check thread types and ball stud orientations on your model prior to fitting to ensure correct mounting and to avoid mix-ups with front and rear link lengths. After installation perform a static alignment check and a short low-speed run to confirm geometry and clearances around the axle, driveshafts, and body.

Maintenance and tuning: aluminum links are less likely to deform but can transfer greater shock loads to adjacent plastic pivots and mountings; inspect pivot points and fasteners after initial runs. Use incremental changes when adjusting link angles or lengths to understand handling changes, and combine with damper and ride-height adjustments for balanced results.