Tamiya Honda City Turbo WR02C Front C-Hub Aluminium by GPM WRC2020  [WRC2020]

Front C-Hub for WR02C

This aluminium front C-hub is an aftermarket RC-scale replacement part designed for the Tamiya Honda City Turbo WR02C platform. It serves as the steering knuckle interface on the front suspension, providing a direct mounting point for the hub carrier and steering linkage while preserving the WR02C suspension layout.

The component is supplied as a 1pr set intended for direct swap with stock plastic parts. In typical installations you retain existing wheel bearings and hub pins, replacing only the C-hubs to alter steering rigidity and response. No real-vehicle implications are made or implied; this is for model-scale use only.

For tuning, aluminium C-hubs are used to reduce flex under load compared with standard plastic parts, which can sharpen turn-in and deliver more consistent steering feedback during aggressive cornering or on abrasive surfaces. Check alignment of steering rods and confirm clearance to the servo horn and front suspension arms during fitment.

Use this aluminium C-hub when you need a stiffer steering interface for scale tuning or to replace worn plastic hubs; verify fit and steering geometry after installation.