TAMIYA M03L/M04M/FF02 Front C Hub Aluminium by 3Racing M04M-08/LB  [M04M-08/LB]

Aluminium Front C Hub for Tamiya M03L/M04M/FF02

This RC-scale front C hub from 3Racing is an aluminium replacement part offered in a light blue anodised finish and identified as M04M-08/LB. It is intended for use on TAMIYA M03L, M04M and FF02 chassis where a machined metal C hub is preferred for front steering assemblies.

Functionally the component serves as the steering knuckle interface on the front suspension, providing the pivot point for wheel steering and linking to the steering linkage and舵機. As an aluminium unit, it focuses on dimensional stability and wear resistance compared with standard polymer pieces, while fitting the same steering location on compatible TAMIYA chassis.

Installation follows standard front-suspension service procedures: remove the stock front C hub, transfer any required pins or inserts if present, fit the aluminium hub in place, and verify wheel alignment and free steering movement. Check clearance with your existing steering linkage and adjust toe or camber setups as needed during reassembly.

For tuning, this front C hub is useful when testing front-end stiffness, steering response, or durability under repeated use; it works alongside shocks, suspension arms, and steering components to influence handling. As with any metal upgrade, monitor wear points such as bearings and pin interfaces after initial runs.