TAMIYA M05/M06/MF-01X Aluminum Front Suspension Arms by JAZRIDER JR-M501-LB  [JR-M501-LB]

Aluminum front suspension arms for M05/M06/MF-01X

This is a set of light blue aluminum front suspension arms manufactured for scale use on TAMIYA M05, M06, and MF-01X chassis, supplied as an aftermarket replacement part by JAZRIDER (JR-M501-LB). The component is intended for model-scale touring and drift cars and serves as a direct-style upgrade to the front suspension arm assembly to alter rigidity and handling response without modifying the chassis geometry.

Compatibility is stated as M05, M06, and MF-01X chassis families; installation follows the factory mounting locations and uses the existing front hinge pin and hardware pattern from those Tamiya models. Typical installation requires removing the front wheels and steering knuckles, extracting the hinge pins, swapping the arms, and reassembling while checking alignment and free movement of the steering linkage and suspension travel.

In setup and tuning the aluminum arms act mainly on stiffness and wear characteristics: compared with stock plastic arms they increase front-end rigidity which can change turn-in feel and feedback to shocks and anti-roll settings. Use them as part of a balanced setup approach, matching spring rates, shock oil, and toe/camber settings to the altered front stiffness to achieve the desired handling balance.

Maintenance notes: inspect mounting holes and fasteners periodically for loosening or damage, keep pivot areas free of grit, and replace any bent or worn hardware to maintain predictable suspension behavior.