TAMIYA T3-01 DANCING RIDER Aluminum Rear Axle Adapters by GPM T3022  [T3022]

Aluminum rear axle adapters for T3-01

This is an RC-scale rear axle adapter set designed specifically for the TAMIYA T3-01 DANCING RIDER platform and supplied by GPM, model T3022. The parts are machined from aluminum 6061-T6 to balance lightness with tensile strength, and they serve to stabilize the wheel joints on both sides of the rear axle to help preserve a smooth run under impact and load.

The adapters are manufactured to close tolerances so the mating surface at the bearing minimizes axial play, allowing rear wheel joints to rotate more freely and consistently. Included with the set are stainless steel round head screws 3x8, 4pcs, intended to secure the adapter to the axle assembly without requiring additional hardware from the user.

In practical setup and tuning, these adapters act as a small but important hop-up: they reduce unwanted movement at the rear wheel pivots, which can improve predictable handling and reduce binding in the drivetrain during acceleration and cornering. Installation requires basic disassembly of the rear axle ends and standard hand tools, and checks should be made for correct bearing seating and screw torque to avoid preloading the bearings.