Tamiya TA01 Alloy C-Hub with 5x8 Bushing by GPM TA1020  [TA1020]

TA01 Alloy C-hub overview

This alloy bearing C-hub is an aftermarket replacement designed for the Tamiya TA01 chassis, providing a rigid mounting point for the front steering assembly and integrating a 5x8 bushing for pivot alignment. The part is intended for RC-scale tuning and repair, keeping installation within common TA01 service routines.

The component replaces factory plastic C-hubs, offering a metal mating surface where the steering knuckle interfaces with the hub carrier and where the bearing or bushing sits. Its role in setup is focused: maintain consistent pivot geometry, reduce flex under steering loads, and support repeatable toe and camber adjustments during track or club runs.

Installation notes: the C-hub uses the same mount locations as the TA01 original part and accepts the specified 5x8 bushing at the pivot. Use existing TA01 hardware and check fitment before final assembly, ensuring the bushing aligns with the steering knuckle and that suspension travel remains unobstructed.

Use this alloy C-hub where a firmer steering mount and predictable pivot alignment are preferred during chassis setup and maintenance for the TA01 platform.