TAMIYA TA-01 Aluminum C-Hubs (Gun Metal) by JAZRIDER JR-TA108-GU  [JR-TA108-GU]

Aluminum C-hubs for TA-01

This JAZRIDER JR-TA108-GU item is an RC-scale aluminum C-hubs set produced for TAMIYA TA-01 chassis use, finished in gun metal. It replaces the original plastic steering knuckles to offer a stiffer mounting point for the front suspension and steering linkages while keeping the part focused on RC chassis function.

Compatibility is specified for the TA-01 platform; the component is intended to mate with standard TA-01 steering mounts and retain the original steering geometry when installed correctly. The aluminium construction provides increased rigidity compared with common plastic parts, which can help maintain alignment under load during practice or club-level track runs.

Installation notes: the set is designed for direct fit on TA-01 style hubs using the existing mounting locations and hardware from the donor chassis. When replacing plastic C-hubs, verify alignment and pivot clearances after fitting, and check that steering link lengths and tie-rod positions match the stock geometry to avoid unintended steering changes. Periodic inspection for fastener tightness and wear at pivot points is recommended for consistent handling.

Tuning role: swapping to aluminum C-hubs affects steering feel and the mechanical stiffness of the front end, so expect small changes in steering feedback and turn-in behavior. Use these parts as a stable platform for adjustments to toe, caster (as applicable to the TA-01 layout), and tie-rod positions when refining on-road handling or when returning the chassis to baseline alignment after suspension changes.