TAMIYA TA08 PRO #45 Harden Steel CVD For Front/Rear by GPM TA8044F/RS  [TA8044F/RS]

TA08 PRO Front/Rear Hardened CVD

This aftermarket CVD set is made for the TAMIYA TA08 PRO chassis to replace the stock front and rear CVDs. Fabricated from hardened steel #45, the parts are intended as direct drivetrain replacements for the CVD area on the TA08 PRO, carrying torque from the transmission to the wheels.

Key mechanical changes are focused on durability and fit: the dogbone diameter is increased from 3.5mm to 4mm to reduce play at the joint, and the hardened steel construction targets wear resistance in the CVD section while maintaining alignment for smooth wheel rotation.

Installation notes: these CVDs fit into the front and rear CVD assemblies on the TA08 PRO chassis and use existing mounting points and retaining hardware. Check fitment and clearance with your current diff cups and drive pins before final assembly.

For builders maintaining or tuning a TA08 PRO drivetrain, these #45 hardened steel CVDs serve as a direct replacement aimed at improving joint solidity and long-term wear characteristics in the front and rear CVD locations.