Tamiya TL-01/GF-01/WR-02 Aluminum C Hub by JAZRIDER TL01-13306-LB  [TL01-13306-LB]

Aluminum C Hub for TL-01/GF-01/WR-02

This aluminum C hub is an RC-scale replacement part designed for direct fitment to Tamiya TL-01, GF-01, and WR-02 chassis layouts. Finished in light blue, the part provides a metal alternative to stock plastic hubs where hobbyists want a consistent mounting surface for steering knuckles and suspension links.

Use and role: the C hub locates the steering knuckle and attachment points for lower suspension links, so swapping to a machined aluminum hub affects suspension geometry repeatability and mounting stability during setup and tuning. It is intended as a like-for-like replacement within the chassis ranges named above.

Installation notes

• Remove the original C hub from the knuckle assembly and transfer any required bushings or shims before fitting the aluminum piece.
• Check screw lengths and thread engagement when installing to avoid interference with the steering knuckle or bearings.
• Verify wheel alignment and suspension travel after installation, and adjust toe and camber as part of routine setup.

Tuning considerations

• A metal C hub can offer more consistent bearing seats and reduced flex compared with some plastic parts, which may change steering feedback and cornering feel.
• When adjusting for handling, retest with the same tyre and shock settings to judge the hub's effect on balance.