This aluminium front bumper is an RC-scale replacement part designed for use on TAMIYA tractor truck models listed in the product title. Fabricated from machined aluminium, the bumper provides a rigid mounting surface for scale applications and helps protect the model's front end during moderate impacts typical in trail and show driving.
The package includes mounting hardware so you can use existing chassis mounting points without modifying the frame. Included fasteners are: 3X30 stainless steel button head screw - 2 pcs, 3X14 stainless steel button head screw - 2 pcs, 3MM lock nut - 2 pcs, 3x2 ring - 2 pcs. These components are stainless steel and match common M3 mounting patterns on TAMIYA tractor truck parts.
Installation is straightforward for hobbyists familiar with standard RC assembly: remove the stock bumper, align the aluminium bumper to the factory mounting bosses, and install the supplied screws and lock nuts. Use a compatible hex driver sized for the supplied button head screws, and verify alignment with the axle and steering linkages before final tightening. The bumper serves both as a visual upgrade and as a structural hop-up for mounting accessories or scale weights.
When tuning for handling or scale realism, consider the bumper's effect on frontal mass and clearance; the aluminium unit adds stiffness without significantly altering suspension geometry if mounted to original points. This part is intended for RC models only and not for any real vehicle.
Use this aluminium bumper to upgrade chassis durability and scale appearance on compatible TAMIYA tractor truck models, fitting existing mount points with the supplied hardware.
Copyright © 2008-2026 rcjaz.com All rights reserved
