TEAM LOSI MINI-T 2.0 14T Hardened Steel Pinion Gear by GPM LM014T  [LM014T]

Mini‑T 14T pinion gear

This is an RC‑scale pinion intended for Team Losi Mini‑T 2.0 2WD platforms, supplied under GPM part code LM014T. The gear is manufactured from hardened 45# steel and is specified with a 2mm bore and a 0.5mm tooth pitch, with 14 teeth. Its basic function is to mount on the motor shaft and transfer power into the spur gear for the Mini‑T 2.0 drivetrain.

Key fitting notes and installation points:

• Design: hardened 45# steel pinion, 14T, 0.5mm pitch.
• Bore: 2mm centre hole to fit motors with a 2mm shaft; confirm your motor shaft diameter before installation.
• Installation: slide onto the motor shaft, set proper gear mesh with the spur gear, then tighten the set screw and verify concentricity to avoid premature wear.
• Tuning role: changing to this 14T pinion alters final drive ratio compared with other tooth counts, affecting acceleration and top speed trade‑offs; choose tooth count to match track and motor characteristics.
• Included items as supplied: pinion gear (1 pcs) and a 3×3 screw shaft (1 pcs).

This item is an RC accessory for drivetrain tuning and repair and is not intended for full‑scale vehicle use.