TRAXXAS 1/10 Rustler VXL Alloy Front Adjustable Spring Damper by GPM RUS087F  [RUS087F]

Front adjustable spring damper overview

This aluminum front spring damper set is a direct aftermarket hop-up designed for the TRAXXAS 1/10 Rustler VXL platform. The kit includes an adjustable damper body with alloy ball top and alloy ball ends, plus three coil spring wire sizes to alter initial spring rate. The construction and included 4mm thick shaft focus on durability and repeatable setup during chassis tuning.

Installation fits the Rustler VXL front suspension mount points without chassis modification when replacing factory front dampers. The alloy ball top and ball ends provide a firmer connection to the suspension linkage which helps reduce slop compared with some plastic fittings. Use the included springs to experiment with ride height and corner control; changing to the thicker wire spring increases initial stiffness while the smaller wire spring softens the response.

For setup, start with the middle spring (1.5mm) and baseline preload and rebound settings on your shocks, then swap to 1.3mm or 1.7mm springs to assess traction and handling. Check threaded adjusters for proper engagement and verify there is no binding on the 4mm shaft through the shock travel. Routine inspection of ball ends and mounting hardware is recommended after several sessions to confirm secure fitment.

This part serves as an option for drivers who want a stiffer connection at the front end and quick spring-swap tuning options; pair with matching rear damping settings for balanced handling.