TRAXXAS 1/10 Rustler VXL Front #45 Hardened Steel Axle with Alloy Body by GPM SRUS41280FH  [SRUS41280FH]

Front #45 hardened axle for Rustler VXL

This is a 1/10-scale front axle assembly designed for TRAXXAS Rustler VXL setups, intended to transmit power and control the front wheel drive geometry on the model. The axle combines a hardened #45 steel main shaft with a 6061 T6 aluminum alloy body to balance torsional strength and reduced rotating mass for RC use.

Key mechanical features include a CVD (constant velocity drive) layout for smoother rotation under steering angles, a retractable/extendable body form to increase clearance and improve rocker articulation, and a spring steel hex insert that stabilizes the assembly during loads. These elements are implemented at RC scale and do not imply any real vehicle application.

Kit contents provided in the supplied set include the following components for assembly and replacement of the stock front axle subassembly:

• CVD - 2 pcs
• Screw Pin M4x2.5x12 - 2 pcs
• 4x2.5 Silicone O-Ring - 2 pcs
• 3x3 Screw Shaft - 2 pcs

Installation notes: this axle is produced to mate with the stock mounting and driveline points on TRAXXAS 1/10 Rustler VXL variants. The CVD interface and spline fittings should be checked for fit and lubrication during installation. The product is intended as a direct replacement or upgrade for hobby RC drivetrain assemblies.

For modelers seeking a stiffer front drive assembly on the Rustler VXL, this axle set provides hardened steel strength with an aluminum body and CVD geometry to improve front-end drivetrain behaviour in scale RC operation.