TRAXXAS 4WD GT4 TEC 2.0 Aluminum Motor Mount Plate by GPM GT018  [GT018]

Aluminum motor mount plate

This aftermarket motor mount plate is produced for TRAXXAS 4WD GT4 TEC 2.0 users and supplied as a 3 pcs set. Machined from 6061 T6 aluminum, the design integrates heat sink fins to improve heat displacement around the motor, and the plate adds mechanical stability to the motor mounting area during track sessions and tuning runs.

Key practical notes: the part is intended for RC-scale use only, it stabilizes the motor and accelerates cooling via the fins, and it complements the stock mounting layout. The package includes stainless steel flat head screws 3x10, 2 pcs for fastener needs during installation.

Installation details from the original design: compatible with the original spur gear 70T layout using four mounting hole positions labeled A to D. Pinion recommendations mapped to hole positions are as follows, follow these when matching motor gearing:

• From A to A: use 20T pinion.
• From B to B: use 21T pinion.
• From C to C: use 22T pinion.
• From D to D: use 23T pinion.