TRAXXAS E-REVO VXL Rear Adjustable Wheelie Aluminum Rebuild Kit by GPM ER2040/W  [ER2040/W]

TRAXXAS E-REVO VXL Aluminum Rebuild Kit For ER2040R Rear Adjustable Wheelie - 7pc set - GPM ER2040/W
Price:
USD$23.90
Brand:
GPM
Model:
ER2040/W
GTIN:
4894538321982
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="TRAXXAS E-REVO VXL Aluminum Rebuild Kit For ER2040R Rear Adjustable Wheelie - 7pc set - GPM ER2040/W" title="TRAXXAS E-REVO VXL Aluminum Rebuild Kit For ER2040R Rear Adjustable Wheelie - 7pc set - GPM ER2040/W"

Rear adjustable wheel rebuild components

This 7pcs aluminum rebuild kit supplies the wheel and axle components used on the ER2040R rear adjustable wheelie assembly for the TRAXXAS E-REVO VXL scale model. The set focuses on replacement parts that address wheel mounting and rear axle retention without altering motor, ESC, or suspension systems.

Parts are provided as hobby-grade replacement components intended for routine maintenance, repair, or set-up changes where the rear wheel spacing or wheelie adjustment needs attention. Installation requires basic RC tools and a familiarity with wheel removal, axle alignment, and thread locking practices.

Packing includes

  • Wheel - 2pcs
  • Axle Rod - 1pc
  • M4 Locknut - 2pcs
  • Shim - 2pcs

Specifications

  • Item Rear adjustable wheelie rebuild kit, 7 pcs (wheel 2pcs, axle rod 1pc, M4 locknut 2pcs, shim 2pcs)
  • Material Aluminum
  • Model Number ER2040/W
  • Compatibility TRAXXAS E-REVO VXL ER2040R rear adjustable wheelie

Use this rebuild kit to replace worn wheel and axle hardware on the ER2040R rear wheelie assembly, restoring correct fit and alignment while keeping adjustments straightforward for hobby-scale setups.

This item is compatible with

  • TRAXXAS E-REVO

What parts are included in the 7pcs kit?

The kit includes 2 wheels, 1 axle rod, 2 M4 locknuts, and 2 shims for the ER2040R rear wheelie assembly.

Is this kit compatible with my E-REVO VXL?

This rebuild kit is specified for the ER2040R rear adjustable wheelie on TRAXXAS E-REVO VXL models; verify the ER2040R reference on your chassis before installation.

What tools are needed to install these parts?

Basic RC tools such as hex drivers for axle hardware, pliers for nuts, and a torque feel are sufficient; use thread locker where appropriate and check alignment after assembly.

How should I maintain aluminum parts to avoid premature wear?

Keep mating surfaces clean, inspect for nicks or burrs, use light lubrication on moving contacts if applicable, and avoid over-tightening locknuts to prevent thread damage.

Copyright © 2008-2026 rcjaz.com All rights reserved