TRAXXAS JATO 4X4 VXL 7075 Alloy Front Steering Blocks by GPM TJ021  [TJ021]

Front steering blocks for JATO 4X4 VXL

This is an RC-scale front steering block set engineered for TRAXXAS JATO 4X4 VXL platforms and related models. Machined from 7075 aluminium, the parts replace the stock plastic blocks to provide a stiffer steering knuckle mounting, while the enlarged outer bearing interface is intended to reduce play and keep the CVD alignment consistent under load.

The kit includes inner and outer bearings sized 12x18x4 and 6x13x4 respectively, supplied to match the revised bore and to smooth rotation at the steering spindle. Fitment and tuning focus on mechanical stability rather than end-user electronics or motor changes, so these blocks are suited for hobbyists looking to tighten steering feel and reduce slop during aggressive off-road use.

Use these 7075 alloy steering blocks to reduce steering play and keep the front CVDs aligned, especially after upgrading to heavier wheels or higher-power drivetrains where stock plastic knuckles may flex.