Traxxas Revo Multiple Engine Mount with Heat Sink by 3Racing RE-052/B  [RE-052/B]

Multiple engine mount with heat sink for Revo

This mount is an RC-scale replacement hop-up designed for the Traxxas Revo platform that combines a multi-position engine mounting concept with an integrated heat sink and blue finish. The text below focuses on compatibility, installation considerations, and how the part affects tuning and thermal management on model setups.

Compatibility is limited to Traxxas Revo series models; do not use this part on full-size vehicles. The component replaces the stock engine mount to offer alternate mounting positions and a heat-dissipating surface intended to assist in reducing localized temperatures around the engine area on nitro or small-scale combustion setups where applicable.

Installation notes: the mount aligns with existing engine mount points on the Revo chassis and typically requires removal of the stock mount and transfer of engine mounting screws. Check thread sizes and use existing mounting hardware where possible. Verify engine and driveline alignment after installation to avoid binding in the gearbox or excess load on drivetrain bearings.

Tuning role: this mount provides discrete changes to engine placement and a metal-contact surface for heat dispersion, which can be used as part of a broader approach to temperature control and balance. Adjusting engine position influences weight distribution and center of gravity, so evaluate suspension and ride height after fitting.

Use this mount as a platform-level hop-up for chassis tuning and improved local heat dispersion on Traxxas Revo models, and validate fitment and alignment during installation to maintain drivetrain reliability.