TRAXXAS SLASH 4X4 LOW-CG aluminium gear adapter with 32-pitch 56T spur and 15T motor gear by GPM SLA155615TLG  [SLA155615TLG]

Aluminium adapter with steel spur and motor gear

This GPM set supplies an aluminium low‑mass gear adapter paired with hardened steel 32‑pitch spur and motor gears intended for RC scale use on TRAXXAS Slash platforms. The components are presented as a matched pair to replace the stock adapter and gears in the specified version, with the goal of providing a consistent mechanical interface between motor output and the drivetrain.

Key technical points are kept simple: the kit centres on a 56T steel spur and a 15T motor gear sized for 32‑pitch gearing, combined with an aluminium adapter to position the motor and maintain gear mesh. The metal spur and motor gear are hardened steel to resist wear under normal RC driving and tuning conditions.

When used for tuning, changing the motor gear (pinion) alters the overall gear ratio; common pairings listed by the manufacturer with a 56T spur include pinion sizes from 13T up to 20T and their corresponding ratios, which let builders trade acceleration for top speed or vice versa by selecting an appropriate motor gear.

• Includes a matched 56T spur and 15T motor gear configured for 32‑pitch systems.
• Aluminium adapter positions the motor for Low‑CG Slash 4x4 layouts.
• Hardened steel gears for improved wear resistance compared with standard materials.

Installation notes: verify gear mesh and axial alignment when installing the adapter and gears, re‑use existing mounting hardware where compatible, and check pinion clearance to avoid binding. This is an RC‑scale replacement/tuning part and is intended for the model version specified below.

Use this set when you need a durable steel spur and a fixed 15T motor gear mounted via an aluminium adapter for gear‑ratio adjustments and steadier drivetrain behavior on the specified TRAXXAS Slash variant.