TRAXXAS Tmaxx 3.3/1.1 Alloy Rims & Tires by GPM TMX3333R/RIM  [TMX3333R/RIM]

Alloy rims and tires for TRAXXAS Tmaxx

This GPM aftermarket set supplies alloy rims with pre-mounted rubber tires designed for TRAXXAS Tmaxx platforms. It is an RC-scale replacement intended to refresh worn wheels or to change handling characteristics on modeled off-road setups. The parts are presented as a matched rim-and-tire pair for straightforward swap-in fit on compatible Tmaxx models.

Compatibility is focused on TRAXXAS Tmaxx 3.3 and Tmaxx 1.1 configurations and references the TMX3333R fitment noted in the product name. Fitment assumes standard Tmaxx wheel hexes and common wheel‑mount arrangements used on those models; confirm your chassis wheel hub interface matches before installation.

Installation notes: the rims and tires arrive ready to be mounted to the vehicle wheel hubs. When changing rims and tires on an RC model, follow normal wheel removal and reinstallation steps, check that wheel nuts and hex interfaces seat correctly, and verify there is no binding with suspension travel. After mounting, perform a low‑speed test to ensure clearance with the suspension and drivetrain.

Tuning role: changing rim diameter, width, or tire compound alters traction, steering response, and weight distribution at model scale. These alloy rims will shift rotational mass compared with plastic wheels and can affect cornering feel and throttle response. Use them as part of a staggered tuning plan alongside tyre pressure, shock damping, and gear ratios to reach the desired handling balance.

Maintenance and care: inspect the tire beads and rim edges after running for loosening or cuts, clean off grit that can accelerate wear, and replace tires when tread or sidewall damage appears. For long service life, avoid prolonged immersion in water and store the set away from direct sunlight when not in use.